Roto Form's Lead clipping machine's
save time and reduce material waste compared to hand clipping. They also improve efficiency and accuracy, and are essential for electronic circuit assembly work. Using PCB lead clippers can greatly reduce costs and
minimize the risk of damage
PCB lead clippers are much faster than hand clipping, especially for large quantities of components, saving valuable time. This allows for better task management or the ability to take on additional projects.
RotoForm's lead clipping machines are versatile and flexible, able to accommodate a wide range of board sizes and types. These machines are designed to handle everything from small, standard-sized PCBs to large, custom-shaped
boards.
0.20" thick to 12" (5.08mm to 304.8mm) wide by any length
cutters will trim copper, steel or kovar
takes only a few seconds using the sturdy, spring-loaded, dovetailed, extruded aluminum fixture
variable from 1,000 to 10,000 RPM will cut up 2500 leads per minute depending on the material and diameter of the lead
variable form 0.0" to .010" (0.0mm to .254mm) depending on all tolerances including warpage
anti-warp mechanical devices will support convex and concave warpage of PCB in horizontal plane
both hands must be occupied - with a series connected thumb switch and drive handle switch. A vertical and horizontal GE Lexan shield protects the operator along with safety glasses that are also supplied. A 25W lamp illuminates the cutting area
will perform 15 to 20 times faster than hand trimming. The blade will trim 100,000 to 1,000,000 leads (depending on material) before sharpening is necessary
since the cutter ranges in size up to 2 inches in diameter, it permits selective cutting to avoid nuts, bolts and hardware in general
The trimming operation serves as an inspection station. The illuminated cutting area allows the operator to see every lead that is cut as-well as blow holes and unsoldered joints
Roto Form has been a
game-changer for our business. We've been able to speed up the clipping process, and our boards look so good every time.
Can't recommend Roto
Form enough.
Our Roto Trim machine has been in use for 19 years without issues. It is maneuverable and very easy to use. With this machine, we can clip PCBs in approximately 45 seconds, which used to take 6 minutes with hand clippers. It has been the best investment we've made.
The clipping machine is
Versatile and user-
friendly. It's revolutionized the electronics manufacturing industry.
Copyright © 2023 Pcbclippingmachine - All Rights Reserved.
hours | Monday-Friday | 9am-5pm
We use cookies to analyze website traffic and optimize your website experience. By accepting our use of cookies, your data will be aggregated with all other user data.